Manual Cradle Feed spreading machine allows spreading of a full range of available fabrics: from very delicate,
thin, elastic and difficult to spread, to thick, medium weight fabrics like jeans. The machine is equipped with a cradle
with belt feeding, and easy to use touchscreen MSK1 spreading machine is available in different working widths
ranging from 150-220cm.
Elimination of manual spreading and layering of fabrics which is the weakest part of the cutting room production chain
Several times increase of spreading efficiency for each type of fabric
Only one operator results in significant reduction of work costs
Very fast spreading of mattresses for small series and single production orders
Constant quality of spreading independent of length of spread marker with elimination of fabric tensioning in different
layers what’s a typical problem for manual spreading
Easy and intuitive operation, possible also for not-qualified personal
Perfect reliability of operator assures continuous production and lowest possible costs of maintenance
Fast and solid service assured by experienced technicians
√ CRF – Cradle feed with a system of feeding belts assuring easy loading and unloading of fabric rolls
√ AEC – Automatic alignment of fabric edge of all spread fabric layers
√ STD – Spreading of fabrics in standard system (right side up with transversal cutting)
√ ZZG – Set of front and end catchers allowing zig-zag spreading (left side to right side)
√ IFS – Intelligent fabric feeding system with dynamic measurement of fabric tension during spreading
gives the possibility to control fabric tension
√ NTF – Non-Tension Feeding – tensionless feeding and spreading of fabric
√ Easy inversion of spreading side (right side up or left side up)
√ Automatic re-winding (feeding and rolling back) with fabric edge alignment
√ Software calculates length of spread fabric with reporting of fabric usage
√ ARC – Automatic one-side cutting of fabric by a transversal cutting unit with rotary blade
√ ACL – Automatic adjustment of cutting unit slat to height of currently spread height of layers
√ TFT – Color touchscreen (LG) assures easy and comfortable adjustments of working parameters
√ 10PR – Possibility to store in memory of the touchscreen up to 10 parameter profiles for different fabrics
√ Seamless cradle feed belt instead of slit belts assures that no fabric edge will go under it
√ Available with different types of spreading tables – most commonly used are 18mm
Light tables with or without air flotation system & Conveyorized tables
Machine Model: Manual Cradle Feed [MSK1]
Machine Name: Manual Fabric Spreading Machine with Cradle Feed
Material Use: Fabrics such as Woven, knit, jeans, Full Lycra, etc.
Fabric Width: 000 cm
Roll Diameter: 450 mm max
Machine Speed: 0-100 mt/min with speed control (depends on fabric style)
Spreading Height: 230 mm Maximum with cutting Unit / 220 mm Maximum with zig zag spreading height /
200 mm Maximum with tubular unit
Fabric Weight: 80 kg max.
Loading Fabric: Easy load
Cradle Left-Right: 0.18 kW 1500 Rpm AC Motor with Gearbox (WAT)
Cradle Feed: 0.75 kW 3000 Rpm AC Motor with Gearbox (PGR Drive Technologies)
Fabric Edge Cutter: Clack Motor (24V DC),Knife transfer motor (24V DC) with gearbox, Knife Rotate (24V DC) (Kormas)
Control Modes: Manuel control
Edge Control: Edge control with 2 Photocells
Electronic System: Special software with LG PLC
Control System: 4.3“ Cermate Brand Color Touch screen Display
Drivers: 2 LG Invertors (Edge Alignment & Cradle Feed)
Settings From Control Panel:
√ Level count √ Tension Settings √ Using with Password
√ Zigzag or One way Selection √ Tension Setting at Start or Stop
Machine Dimensions:
Machine Weight:
Installed Power: 1.5 kW 220 volt
Attachments: Automatic cutting device & Movable catcher [standard]
Paint: Main with electrostatic paint, covers with wet paint