MN1 MINI MASTER

Light Weight Fabric Automatic Spreading Machine

Automatic spreading machine allows spreading of a full range of available fabrics: from very delicate, thin, elastic and difficult to spread, to thick, heavy fabrics like jeans. The machine is equipped with a cradle with belt feeding, driven all spreader wheels, operator’s platform and easy to use touchscreen MN1 spreading machine is available in different max. Working widths ranging from 150-260 cm.

Product Description

MAIN ADVANTAGES OF MINI MASTER [MN1] USAGE
  • Elimination of manual spreading and layering of fabrics which is the weakest part of the cutting room production chain
  • Several times increase of spreading efficiency for each type of fabric
  • Only one operator results in significant reduction of work costs
  • Very fast spreading of mattresses for small series and single production orders
  • Constant quality of spreading independent of length of spread marker with elimination of fabric tensioning in different
    layers what’s a typical problem for manual spreading
  • Easy and intuitive operation, possible also for not-qualified personal
  • Perfect reliability of operator assures continuous production and lowest possible costs of maintenance
  • Fast and solid service assured by experienced technicians
OPERATIONAL SPECIFICATIONS OF MINI MASTER [MN1]

√ CRF – Cradle feed with a system of feeding belts assuring easy loading and unloading of fabric rolls
√ AEC – Automatic alignment of fabric edge of all spread fabric layers
√ STD – Spreading of fabrics in standard system (right side up with transversal cutting)
√ ZZG – Set of front and end catchers allowing zig-zag spreading (left side to right side)
√ IFS – Intelligent fabric feeding system with dynamic measurement of fabric tension during spreading
gives the possibility to control fabric tension
√ NTF – Non-Tension Feeding – tensionless feeding and spreading of fabric
√ Easy inversion of spreading side (right side up or left side up)
√ Automatic re-winding (feeding and rolling back) with fabric edge alignment
√ Automatic stop of the machine when fabric is finished with audible signal
√ Programmable shifting points allows for fast cutting of the places with faults and continuation of work
√ Software calculates length of spread fabric with reporting of fabric usage
√ ARC – Automatic one-side cutting of fabric by a transversal cutting unit with rotary blade
√ ACL – Automatic adjustment of cutting unit slat to height of currently spread height of layers
√ ODP – Movable operator platform [which can be closed and locked] facilitates usage and assures
highest possible spreading speed
√ TFT – Color touchscreen (LG) assures easy and comfortable adjustments of working parameters
√ 10PR – Possibility to store in memory of the touchscreen up to 10 parameter profiles for different fabrics
√ ASS – Automatic stoppage of machine’s movement after approaching to an obstacle assures safety of
operator and other personnel which could stand close to the machine
√ Seamless cradle feed belt instead of slit belts assures that no fabric edge will go under it
√ Available with different types of spreading tables – most commonly used are 18mm
Light tables with or without air flotation system & Conveyorized tables

MAIN SPECIFICATIONS

Machine Model: Mini Master [MN1]
Machine Name: Fully Automatic Fabric Spreading Machine
Material Use: Fabrics such as Woven, knit, jeans, Full Lycra, etc.
Fabric Width: 000 cm
Roll Diameter: 450 mm max
Machine Speed: 0-100 mt/min with speed control (depends on fabric style)
Spreading Height: 230 mm Maximum with cutting Unit / 220 mm Maximum with zig zag spreading height /
200 mm Maximum with tubular unit
Fabric Weight: 120 kg max.
Loading Fabric: Easy load
Main Spreading Motor: 0.75 kW 1500 Rpm AC Motor with Gearbox (PGR Drive Technologies)
Cradle Left-Right: 0.18 kW 1500 Rpm AC Motor with Gearbox (WAT)
Cradle Feed: 0.75 kW 3000 Rpm AC Motor with Gearbox (PGR Drive Technologies)
Lift Motor: 0.19 kW 24V DC Motor with Gearbox (KORMAS)
Fabric Edge Cutter: Clack Motor (24V DC),Knife transfer motor (24V DC) with gearbox, Knife Rotate (24V DC) (Kormas)
Control Modes: Automatic or Manuel control
Edge Control: Edge control with 2 Photocells
No Cloth Stop Funct: Automatic stop with 1 photocell control when fabric is over
Safety Device: 2 security photocells to stop the machine if someone step in front/rear side of the machine.
Height Photocell: A photocell which moves lift while spreading height goes up
Electronic System: Special software with LG PLC
Control System: LG 5,7 inch Touch Screen
Drivers: 2 LG Invertors

Settings From Control Panel

√ Level count √ Spreading Length √ Spreading Speed (forward and backward) √ Tension Settings
√ Using with Password √ Zigzag or One way Selection √ Tension Setting at Start or Stop
√ Disabling Security Sensor if Needed √ Disabling Fabric Over Sensor if Needed

Machine Dimensions:
Machine Weight:
Installed Power: 5 kW 220 volt
Attachments: Automatic cutting device & Movable catcher [standard]
Paint: Main with electrostatic paint, covers with wet paint
Operator Platform: Allows operator to ride alongside the table

Spreading Table:

Table Length: 00 Meter
Table Width: 000 cm. Special construction that can be used with MN1 Spreading Machine
Table Electric System: EAE Busbar System
Paint: Electrostatic Paint
Table Height: Between 840-870 mm
Rail System: Enable for MN1 Spreading Machine and its platform

 

Technical Properties

Name
Email
Phone
Enquiry
    LOCATIONS

    We are everywhere. 77 Country Wolrdwide




    GET IN TOUCH

    Follow our activity

    We’re also on social media!